STIEBEL ELTRON DEM 3 Bedienung Und Installation Seite 41

INSTALLATIoN
Installation
f Route the power cable through the knock-out in the back
panel.
f Hook in the appliance cover with the heater at the bottom.
f Click the heater into place using the snap fastener.
f Secure the appliance cover with the cover fixing screws.
Tap installation
Property damage
!
f When making the connections, counterhold the
torque on the appliance using a size 14 spanner.
f Install the tap. For this, also observe the tap operating and
installation instructions.
Pressure-tested tap
Note
f Fit the 3/8 connection hose and the 3/8 tee provided.
www.stiebel-eltron.com
10.2.2 Oversink installation, non-pressurised, with non-
pressurised tap
Tap installation
Property damage
!
f When making the connections, counterhold the
torque on the appliance using a size 14 spanner.
f Install the tap. For this, also observe the tap operating and
installation instructions.
Appliance installation
f Fit the appliance to the tap with the water connections.
DEM | 41