STIEBEL ELTRON DEM 3 Bedienung Und Installation Seite 40

INSTALLATIoN
Installation
Appliance installation
Note
The wall must have sufficient load bearing capacity.
f Mount the appliance on the wall.

f Undo the cover fixing screws by two turns.
f Undo the snap fastener using a screwdriver.
f Remove the appliance cover with the heater towards the
front.
40 | DEM
f Using pliers, break out the knock-out for the power cable


f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable
in the appliance cover. Correct the contours with a file if
necessary.

rawl plugs and screws.




www.stiebel-eltron.com