Fronius OPT/i SpeedNet Connection iWave230i Installationsanleitung Seite 10

General
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
▶
Requirements When operating the installation set OPT/i SpeedNet Con. iWave230i, the installation set
OPT/i Ethernet iWave230i (4,101,063) must not be connected to the power source.
Scope of supply
Required tools -
-
-
10
WARNING!
All the work and functions described in this document must only be carried out by
technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equipment
and all system components.
WARNING!
Before starting work, switch off all devices and components involved, and discon-
nect them from the grid.
Secure all devices and components involved so they cannot be switched back on.
After opening the device, use a suitable measuring instrument to check that electri-
cally charged components (such as capacitors) have been discharged.
TX 20 screwdriver
TX 25 screwdriver
Side cutters
not shown:
- this set of Installation Instructions