Technical Data; Circular Saw - Hilti SCW 22-A Original Bedienungsanleitung

All manuals and user guides at all-guides.com

4 Technical data

4.1 Circular saw

Rated voltage
Weight in accordance with EPTA procedure 01/2003
Specified blade diameter
Blade disc thickness
Kerf width
Saw blade arbor size
Rated speed under no load
Maximum cutting depth
Bevel cutting angle
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually in use for a task. This may significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
Noise emission values determined in accordance with EN 60745
Sound (power) level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Vibration emission value for sawing in wood (A
Uncertainty (K)
5 Operation
5.1 Removing the battery
1. Press the two release buttons and hold them in the pressed position.
2. Pull the battery out of the product to the rear.
5.2 Removing the saw blade
WARNING
Risk of burning injury. A hot accessory tool, clamping flange or clamping screw and the sharp edges
of the saw blade present hazards.
▶ Wear protective gloves when changing saw blades.
1. Pull the battery out of the product to the rear.
2. Insert the hex. socket wrench in the saw blade clamping screw.
3. Press the spindle lockbutton and hold it in this position.
)
WA
)
WA
)
pA
)
pA
10
3
SCW 22­A
21.6 V
3.9 kg
160 mm ... 165 mm
0.5 mm ... 1.5 mm
1.5 mm ... 2 mm
20 mm
4,000 rpm
57 mm
0° ... 50°
SCW 22­A
104 dB(A)
3 dB(A)
93 dB(A)
3 dB(A)
SCW 22­A
) 1.2 m/s²
h, W
1.5 m/s²
21