Bluetooth Connections; Connect Using The Bluetooth Menu On Your Mobile Device - Bose A30 Bedienungsanleitung

BLUETOOTH CONNECTIONS

NOTE: This section applies to Bluetooth models only.

Connect using the Bluetooth menu on your mobile device

1. Make sure the Secondary Audio Mode switch is in the MUTE or MIX position
(see page 45) and the REVERSIONARY operation switch is set to OFF
(see page 28).
NOTE: If the Secondary Audio Mode switch is set to OFF or the REVERSIONARY
operation switch is set to ON, Bluetooth functionality is disabled.
2. Press and hold the Bluetooth/Multi-function button l for 1 second.
The Bluetooth light blinks purple.
3. On your mobile device, enable the Bluetooth feature.
NOTE: The Bluetooth feature is usually found in the Settings menu.
4. Select the headset from the device list.
Once connected, you hear a tone, and the Bluetooth light blinks blue.
NOTES:
• After 5 minutes of inactivity, the headset automatically exits pairing mode, and the
Bluetooth light turns off. To turn the Bluetooth feature back on, press l.
• Each time you turn on the Bluetooth feature, the headset attempts to reconnect
with the two most recently connected Bluetooth devices. If the device(s) are turned
off or out of range, the headset attempts to reconnect to any other devices in the
pairing list, then returns to pairing mode. See "Reconnect a mobile device" on
page 40.
S ECON DA RY AU D I O S O UR CE S
Bose A30
3 9
|
E N G