Velleman CAMIP7N Bedienungsanleitung Seite 13

Refresh Camera List
Use this option to update the camera list, for example when a new
camera is added to the network.
Flush ARP Buffer
When both a wireless and wired connection to a camera exists, a
problem with the ARP (Address Resolution Protocol) may arise
resulting in the camera not being accessible via the browser.
In this case the ARP buffer should be flushed.
About IP Camera Tool
This window shows details about the IP Camera Tool.
11. Device management
If you login as an administrator, you have access to the device
management settings.
To do so:
1. Start the IP Camera Tool (see above).
2. Login with your browser (see above).
3. Click the link Device Management below the camera controls.
V. 08 – 04/06/2015
CAMIP7N
13 ©Velleman nv