Network Configuration
Use this window to view or change the network settings of the
camera.
When connected to a DHCP router, check the Obtain IP from DHCP
server checkbox, otherwise uncheck it and fill in the data
manually.
In case of a subnet mismatch, change the IP-address or subnet
mask.
When in doubt about the network settings, contact a qualified
network administrator.
Upgrade firmware
Only use this option when problems with the current version are
noticed. Do not upgrade if the camera works fine.
Caution: when the upgrade process is interrupted or a wrong
version is installed the camera might not work anymore.
V. 08 – 04/06/2015
CAMIP7N
12
©Velleman nv