Wireless Connection - Velleman CAMIP22 Bedienungsanleitung

8.2

Wireless Connection

1. Open the [Settings] tab on top of the interface.
2. Click [Network] > [Wireless Settings] on the left side of the interface. Click [Scan].
3. Click the name of your router in the list, and the corresponding SSID and encryption will be
automatically filled on the right side of the page. Enter your password.
4. Click [Save] and disconnect the network cable. Do not power off the camera until it is displayed in
the list.
V. 02 – 04/06/2015
CAMIP22
Click the router name and enter your password.
Enter your password and click [Save].
7 ©Velleman nv