General; Purpose Of Use; Starting Up; Determining The Completeness Of The System - Drivetest Fm100 Handbuch

Drive Test GmbH München
1

GENERAL

1.1

PURPOSE OF USE

The purpose of use of the pinch force meter system FM200 is to measure the closing force of
power operated closing systems of cars.
1.2

STARTING UP

1.2.1 Determining the completeness of the system

The FM200-system consists of the following parts:
Set of sensors FM100
Display unit SEB2 or SEB2.2
USB-cable, USB charger (SEB2.2)
Software PinchPilot (USB stick)
Manual, calibration certificate (placed in the cover of the transport case)
Transportation case
Version 7.1
Handbuch / Manual FM100 Seite 63 von 114
Archiv: FM100_DE_EN_V7.1.e