Safety - Trumpf TruTool S 114 Originalbetriebsanleitung

EN
Contents
1 Safety.................................................
2 Product description ............................
3 Operation ........................................... 11
4 Consumables and accessories.......... 11
5 Troubleshooting ................................. 11
6 Declaration of conformity ................... 12
7 Disposal of old power tools and elec-
tronic devices..................................... 12

1 Safety

1.1 General safety instructions
- Read all safety warnings, instructions, il-
lustrations and specifications provided
with this power tool.
Failure to follow all instructions listed be-
low may result in electric shock, fire and/
or serious injury.
- Save all warnings and instructions for fu-
ture reference.
1.2 Additional safety instructions
WARNING
Danger of hand injuries due to
sharp blades or edges
Do not reach your hand into the pro-
u
cessing section.
Wear protective gloves.
u
WARNING
Danger of injury or property dam-
age due to use of third-party acces-
sories
Only use original TRUMPF acces-
u
sories.
8
1.3 Symbols
The following symbols are important for
8
reading and understanding the operator's
9
manual. The correct interpretation of the
symbols helps to operate the power tool
properly and safely.
Symbols Description
S 114
(2A5)
Li-ion
Translation of the original
operator's manual
Type of shears, e.g.
TruTool S 114 (2A5)
Power tool with rechargeable
battery
Power tool with speed controller
Inspection
Check charge of rechargeable
battery
Loosening/tightening Torx-head
screw
Cleaning the surface
Read operator's manual
Disposal/recycling of old devices
and batteries