Lifting, Transport & Unloading; Technical Specifications - voestalpine Bohler GT 250 Betriebsanweisung

1 WARNING
Before performing any operation on the machine,
make sure that you have thoroughly read and
understood the contents of this booklet.
Do not perform modifications or maintenance
operations which are not prescribed.
The manufacturer cannot be held responsible for damages to
persons or property caused by misuse or non-application of the
contents of this booklet by the user.
Please consult qualified personnel if you have any
doubts or difficulties in using the equipment.
2 INSTALLATION
Installation should be performed only by expert
personnel authorised by the manufacturer.
During installation, ensure that the power source
is disconnected from the mains.
2.1 Lifting, transport & unloading
- The equipment is not equipped with specific lifting elements.
Use a fork lift truck paying attention during operations.
Do not underestimate the weight of the equip-
ment: see technical specifications.
Do not move or position the suspended load
above persons or things.
Do not drop or apply undue pressure on the
equipment.
2.2 Installation
Use suitable wrenches and tools.
- Put the WU on the GT and block it with the 4 screws.

3 TECHNICAL SPECIFICATIONS

Dimensions (lxdxh)
Weight
GT 250
800x400x120mm
18 Kg.
9