Medion E66050 Bedienungsanleitung Seite 55

The set frequency band is now played. If no station is available on this band, there
will be nothing to hear.
In DAB mode, we recommend simply using the automatic station search "Full Scan".
10.9.3. Storing favourites
Store the required station in a programme position that you have selected.
 Start DAB mode.
 Use the Enter Tune -/+ controller to select the required station.
 Press and hold one of the 4 station memory buttons 1, 2, 3, 4+.
 Use the Enter Tune -/+ controller to select a memory slot from 1–40 and press
the Enter Tune -/+ controller to confirm your selection.
Memory slots 1–4 can be called up directly using station memory but-
tons 1–4.
10.9.4. DRC
In this case, use the so-called DRC mode. DRC mode reduces the difference between
loud and quiet sounds.
 Press the Menu button.
 Use the Enter Tune -/+ controller to select the <DRC> menu and press the Enter
Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the required frequency band and
press the Enter Tune -/+ controller to confirm your selection.
Select the required setting Low, High or deactivate DRC mode with Off here.
10.9.5. Prune
The device features the option to delete DAB stations from the station list that are
no longer transmitting or that have changed frequency.
 Press the Menu button.
 Use the Enter Tune -/+ controller to select the <prune> menu and press the En-
ter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select <yes> and press the Enter Tune -/+
controller to confirm your selection.
Inactive stations are deleted.
 Use the Enter Tune -/+ controller to select <no> and press the Enter Tune -/+
controller to confirm your selection.
The prune function is deactivated.
56