Atex Units; Functional Safety - Eaton SM87HXB Bedienungsanleitung

Xenon beacon - SM87HXB & SM87XBT
English
4.0 Maintenance
During the working life of the unit, it should require little
or no maintenance. However, if abnormal or unusual
environmental conditions occur due to plant damage or
accident etc., then visual inspection is recommended.
If the unit requires cleaning, then only clean exterior with
a damp cloth to avoid electro-static charge build up.
If a unit fault should occur, then the unit can be repaired
by Eaton. All parts of the unit are replaceable.
If you acquired a significant quantity of units, then it is
recommended that spares are also made available.
Please discuss your requirements with the Technical Sales
Engineers at Eaton.
description
Cover assembly (Without lens guard fitted)
Cover assembly (With lens guard fitted)
O-ring (Alloy units)
O-ring (Stainless Steel units)
Electronics assembly (110Vac / 60fpm)
Electronics assembly (240Vac / 60fpm)
Electronics assembly (24Vdc / 60fpm)
Spare xenon tube
Cover screw for st. steel unit (4 off required)
Cover screw for alloy unit (4 off required)
5.0 Certification/approvals
IECEx units
Certified to IEC 60079-0, IEC 60079-1 and IEC 60079-31
Ex d unit (IEC certification No. IECEx BAS 09.0059)
Ex d IIC Tx (Tamb.) Gb
Ex tb IIIC Tx (Tamb.) Db IP66/IP67
Unit type T-rating (Tx)
SM87HXB T95°C
T80°C
T65°C
SM87XBT/A (Electronics)
T70°C
T55°C
SM87XBT/B (Xenon tube)
T110°C
T95°C
T80°C
T65°C
The IECEx certificate and product label carry the IECEx
equipment protection level marking
Gb
2
Xenon beacon - SM87HXb & SM87XbT- drafT 1 TM001 Issue J February 2023 www.eaton.com
Db
Where Gb signifies suitability for use in a Zone 1 surface
industries area in the presence of gas.
Where Db signifies suitability for use in a Zone 21 surface
industries area in the presence of dust.

ATEX units

Certified to EN60079-0, EN60079-1 and EN60079-31
Ex d unit (ATEX certification No. Baseefa03ATEX0222)
Ex d IIC Tx (Tamb.) Gb
Ex tb IIIC Tx (Tamb.) Db IP66/IP67
Unit type
SM87HXB
SM87XBT/A (Electronics)
SM87XBT/B (Xenon tube)
Part number
Contact Eaton
Contact Eaton
PX99900312
PX99900233
PX99900094
The ATEX certificate and product label carry the ATEX
PX99900121
group and category marking:
PX99900099
PX99900122
Where:
PX99900584
PX99900818
II
2
G
D
The ATEX certificate and product label also carry the
following mark:
ambient temp
This signifies unit compliance to the relevant European
range (Tamb.)
directives, in this case 94/9/EC, along with the number
(-55°C to +70°C)
of the notified body issuing the EC type examination
(-55°C to +55°C)
certificate.
(-55°C to +40°C)
(-55°C to +55°C)
(-55°C to +40°C)
(-55°C to +85°C)

6.0 Functional safety

(-55°C to +70°C)
Introduction
(-55°C to +55°C)
(-55°C to +40°C)
The SM87HXB Beacon has been designed for use
in potentially explosive atmospheres and harsh
environmental conditions. The marine grade alloy or
stainless steel enclosures are suitable for use offshore
or onshore, where light weight combined with corrosion
resistance and strength is required.
T-rating (Tx)
T95°C
T80°C
T65°C
T70°C
T55°C
T110°C
T95°C
T80°C
T65°C
II 2 GD
Signifies compliance with ATEX
Signifies suitability for use in surface industries
Signifies suitability for use in a zone 1 area
Signifies suitability for use in the presence of gases
Signifies suitability for use in the presence of dust
1180
ambient temp
range (Tamb.)
(-55°C to +70°C)
(-55°C to +55°C)
(-55°C to +40°C)
(-55°C to +55°C)
(-55°C to +40°C)
(-55°C to +85°C)
(-55°C to +70°C)
(-55°C to +55°C)
(-55°C to +40°C)