Veripart VPVR701 Benutzerinformation Seite 38

4. Carefully remove the door by moving it towards you and lifting it off the lower hinge. Place
the door on a safe location.
5. In order to remove the hinge at the
bottom, you must lift the larder backwards
(max. 45°).Remove the adjustable foot to
the left, by fully unscrewing it.Remove the
screws while supporting the lower hinge.
Remove the lower hinge.
6. Before placing the lower hinge on the
other side, the pin of the hinge must be
removed and the direction of the hinge
must be turned around (from 1 to 2).
7. Place the lower hinge on the other side
with the screws. Also place the adjustable
foot on the correct location. Place the
door against the appliance and make
sure the bottom side is properly placed on
the lower hinge.
8. Attach the upper hinge on the other side with the screws. Place the top on the appliance
and fasten it with the screws at the rear. Check that the door is properly aligned, both
horizontally and vertically, before the lower hinge is fully tightened.
9. Level the appliance with the adjustable feet. Allow the appliance to rest for 2 to 3 hours
before inserting the plug in the socket.
2
1
38