Buttons & Lights - Sure Petcare SureFeed Bedienungsanleitung

Buttons and lights
Buttons
There are five buttons on the feeder. These can be found at the rear of the product:
Zero button - used to calibrate the feeder and
ensure you are giving the correct amount of food -
see page 17. This button will zero both sides of
the feeder, whether you're using a single bowl
or half bowls.
When using half bowls, if you want to zero
them independently you can do this using
the Sure Petcare App.
Lid lock
Locked - this means you cannot pull
and remove the lid from the feeder.
Unlocked - you are able to pull the
lid when it's in the open position
to remove it.
The lid lock should remain locked at all times and only be unlocked
when you want to remove the lid for cleaning. This is so you can
stop very clever unauthorised pets from trying to remove the lid
to access the food. Be aware that this doesn't prevent the lid
from opening.
13
Open/Close button - opens and closes
the lid so you can access the bowl(s).
Add a pet button - used to add your
pet's microchip ID into the feeder -
see page 15.
Training mode button - used to activate
training mode which teaches your pet
to use the feeder - see page 19-20.
Settings button - used to connect the
feeder and the Hub - see page 12.
Rear LED
Solid green light. The green light will come on every time an authorised pet eats from the
feeder.
Flashing green light. The feeder is in 'Add a pet' mode -
see page 15. The light will continue to flash until a microchip
is added or until you exit the mode.
Flashing orange light. The feeder is in training mode -
see page 19-20. The number of flashes relates to the stage
of training.
Flashing red light. The batteries are running low.
Portion indicator lights
If you've set a portion weight in the Sure Petcare App, the lights on
the front of the feeder will act as a guide when adding food.
The portion indicator lights will represent the amount of food you've
added so you can ensure your pet is getting the correct portion.
For more information about the benefits of accurate portioning
please see page 16.
Using a single bowl
Both sets of lights will illuminate simultaneously
when food is added to the single bowl.
If you want to switch from half bowls to a single bowl and vice versa, you need to make
the change via the Sure Petcare App.
If you haven't set a portion weight in the app, the lights will not illuminate when food
is added to the feeder.
Using half bowls
The lights on the right-hand side of the feeder
correspond to the bowl on the right and it's
the same for the left. The lights will illuminate
when food is added to each side.
EN
14