Warranty & Disclaimer - Sure Petcare SureFeed Bedienungsanleitung

Warranty & disclaimer
Warranty: The SureFeed Microchip Pet Feeder Connect carries a three-year warranty from
the date of purchase, subject to proof of purchase date. The warranty is restricted to any
fault caused by defective materials, components or manufacture. This warranty does not
apply to products whose defect has been caused by normal wear and tear, misuse, neglect
or intentional damage. In the event of a part failure due to faulty parts or workmanship, the
part will be replaced free of charge during the warranty period only. At the manufacturer's
discretion, a replacement product may be provided free of charge in the case of a more
serious malfunction.
If you are a resident of a jurisdiction with consumer protection laws and regulations that
contain provisions that are more beneficial to you than the terms of this warranty, such laws
and regulations shall supersede the terms of this warranty.
This warranty will only apply to the original purchaser of the product. This warranty will not
apply to any products sold for resale, other than through a Sure Petcare approved distributor.
Disclaimer: The Microchip Pet Feeder Connect and app report pet food consumption by
detecting a pet's microchip ID and then measuring the weight of the bowl before and after
they finish eating. In most cases this will give reliable pet food consumption data, however
unexpected or unusual use of the Feeder (i.e. a pet removing the bowl or playing with food)
may lead to unreliable information. Sure Petcare cannot accept liability for any damage,
harm or inconvenience which may be incurred as a result of incorrect reporting of pet
food consumption.
The SureFeed Microchip Pet Feeder Connect incorporates selective access features which have
been designed to minimise the risk of pets eating each other's food. However, it is not possible
to fully guarantee the exclusion of all other pets in all circumstances. In the rare event of an
unauthorised pet gaining access to the Feeder, Sure Petcare cannot accept liability for any
damage or inconvenience which may be incurred.
Disposal of Products and used Batteries: This icon indicates products subject
to the following legislation:
The Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE Directive) and
UK regulation SI 2013/3113 (WEEE 2013) and The Battery Directive 2006/66/EC (as amended
2013/56/EU) and the UK regulation SI 2009/890 requires households to dispose of EEE
products and waste batteries that have reached the end of their life in an environmentally
responsible manner. To reduce the impact on the environment these cannot be placed in
household waste bins and must be recycled at an appropriate recycling facility.
Ensure batteries are replaced before the expiry date shown on the battery or the battery
packaging and disposed of safely and appropriately.
In case of battery leaks, wear appropriate protective clothing to protect yourself from any
exposure to harmful chemicals before disposing of the batteries and cleaning up any spillage.
When cleaning up a spillage avoid contact with skin. Battery chemicals shouldn't be placed
near the eyes or ingested. Contact a medical professional immediately if this should occur.
27
EN
FCC compliance: This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device has been designed
and complies with the safety requirements for RF exposure in accordance with FCC rule
part §2.1093 and KDB 447498 D01.
IC compliance: CAN ICES-3(B)/NMB-3(B): This device complies with Industry Canada
license-exempt RSS standards. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
To meet RF exposure guidelines, a separation distance of 200 mm should be maintained.
This device complies with the safety requirements for RF exposure in accordance with
RSS-102 Issue 5 for portable use conditions.
Conformité IC: CAN ICES-3(B)/NMB-3(B): Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Pour respecter les consignes d'exposition aux RF, une distance de séparation de 200 mm doit
être maintenue. Cet appareil est conforme aux exigences de sécurité concernant l'exposition
aux RF selon la norme RSS-102, 5ème édition, pour des conditions d'utilisation portable.
EN
28