Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
8
9
4x
10
20
1
2
3
4
START
START
STOP
STOP
4x
1
2
3
4
5
6
START
STOP
TECHNICAL DATA
Type
Production code
Battery voltage
Frequency band(s) of Bluetooth
Radio-frequency power
5
6
7
8
9
Bluetooth version
1
2
3
4
5
6
Rated speed
Capacity
Die Heads
Weight according EPTA-Procedure 01/2014 (Li-Ion 5.0 Ah ... 12.0 Ah)
Weight (tool only)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
Vibration information: Vibration total values (triaxial vector sum) determined
according to EN 62841
Vibration emission value a
/ Uncertainty K
h
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure
to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS FOR PIPE THREADERS
a) Always use the support device provided with the tool. Loss of
control during operation can result in personal injury.
b) Keep sleeves and jackets buttoned while operating the tool. Do
not reach across the tool or pipe. Clothing can be caught by the
pipe or the tool resulting in entanglement.
c) Only one person must control the work process and tool ope-
ration. Additional people involved in the process may result in
unintended operation and personal injury.
7
8
9
d) Keep floors dry and free of slippery materials such as oil. Slip-
pery floors invite accidents.
1
2
3
4
5
START
STOP
7
8
9
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
• When threading or backing die head off pipe, firmly hold the
tool to resist forces regardless of support device used. This will
reduce the risk of striking, crushing and other injuries.
• Do not use dies that are showing signs of wear, dull, or dama-
ged. Sharp cutting tools require less torque and the tool is easier
to control.
• Only use:
• Milwaukee FPT114H
• Ridgid 11-R 1/8" - 1 1/4"
• Do not store die heads in tool to prevent metal on metal
wear.
• Always use common sense and be cautious when using
tools. It is not possible to anticipate every situation that could
result in a dangerous outcome. Do not use this tool if you do not
understand these operating instructions or you feel the work
is beyond your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry important infor-
6
7
8
9
mation. If unreadable or missing, contact a MILWAUKEE service
facility for a free replacement.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paint
ENGLISH
M18 FPT114
Pipe Threader
4913 82 01 XXXXXX MJJJJ
18 V ⎓
2400 - 2483,5 MHz
3,0 dBm
4.2 BT signal mode
0 - 35 min
-1
1/8" - 1 1/4" (DN6 - DN32)
Milwaukee FPT114H
Ridgid 11-R
6,1... 6,9 kg
4,8 kg
-18 ... +50 °C
M18B5 - M18B9; M18HB...
M12-18...; M18DFC; M1418C6
77 dB (A) / 3 dB (A)
88 dB (A) / 3 dB (A)
0,70 m/s
/ 1,5 m/s
2
2
21
Werbung
Inhaltsverzeichnis
