Technical Data; Vibration Information; English - Milwaukee M18 HCC45 Originalbetriebsanleitung

TECHNICAL DATA

Calble Cutter
Production code
Battery voltage
Nominal force
Cutting range Depends on cable type
ACSR: Aluminium-/Steel cable
Copper / Aluminium
Weight according EPTA-Procedure 01/2003
(Li-lon 2,0 Ah)
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 76,9 dB(A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according
to EN 62841
GB
Vibration emission valuea
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for di erent
applications, with di erent accessories or poorly maintained, the
vibration emission may di er. This may signi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the e ects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.

English

16
M18 HCC45
4587 00 01...
... 000001-999999
18 V
77,8 kN
max. Ø 44 mm
6,0 kg
87,9 dB(A)
1,2 m/s
2
h
1,5 m/s
2
2
3
1
4
10
11
9 9
2
8
7
Device description
1 Front blade
2 Jaw release levers
3 Rear blade
4 Blade retaining pin
5 Hanger
6 Handle
WARNING Read all safety warnings, instructions, illus-
trations and speci cations provided with this device. Failure
to follow the warnings and instructions may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future reference.
CABLE CUTTER SAFETY WARNINGS
To reduce the risk of explosions, electric shock and damage to
property and equipment, never cut live electrical cables. Tool is
NOT insulated.
Keep hands and loose items of clothing away from cutting tools
and other moving parts. There is a risk of serious injury, including
severing of limbs.
The use of protective clothing is recommended, such as dust
mask, protective gloves, sturdy non-slip footwear, helmet and ear
defenders.
Use protective equipment. Always wear safety goggles when
working with the cable cutter.
Prevent accidental starting of the cable cutter. Before connecting
to a removable battery, ensure that the trigger is secured with the
switch lock.
Never hold the cable cutter by the cutting jaws.
Before using, always check the cutting jaws for cracks and other
signs of wear.
Only use the cable cutter, removable battery and charger if they are
in perfect technical condition.
Have damage repared immediately by an authorised workshop.
Remove the battery pack before starting any work on the
appliance.
The cable cutter may only be used with a cutting tool inserted.
5 5
6
12
7 LED
8 Release trigger
9 Trigger
10 Side handle
11 5 mm hex socket screws
12 Battery