hanseatic HCM9001TJSD Gebrauchsanleitung Seite 42

Page EN-14 Preparation
You will find this symbol
on the hotplate. It warns
of a hot surface.
(11) (1)
1. Open the lid (2) of the water
tank (3).
2. Fill the jug (8) with fresh, cold
tap water.
3. Pour the water out of the jug (8)
into the water tank (3) up to the
Max mark on the water level in-
dicator (4).
4. Insert the filter basket (1) into
the appliance.
5. Close the empty jug (8) with the
jug lid (9).
(4)
6. Place the jug (8) on the hot-
(7)
7. Close the lid (2) of the water
8. Insert the mains plug (5) into
(11)
plate (7) so that the jug lid (9)
pushes the drip guard (11) on
the filter basket (1) upwards.
tank (3). It must click audibly
into place.
a properly installed and easily
accessible socket.