Safety Instructions - Power Craft PBF-1050E Benutzerhandbuch

SPARE PARTS LIST PBF-1050E
REF NR DESCRIPTION
4 SPEED REGULATOR
5 DEPTH KNOB
6 COPPE BUSH
8 BRUSH HOLDER
9 ENCLOSURE
17 SWITCH
18 PULL-BACK BAR
19 SWITCH ACTUATOR
23 STATOR
27 BEARING 60018
28 ROTOR
31 BEARING 80103
33 SPRING FOR COLLET
34A COLLET
34A COLLET
35 CHUCK NUT
36 RUBBER CAP FOR HANDLE
39 LOCKING LEVER
42 GEAR
43 BLOCK STOP
44 SPEED REGULATOR
46 RACK BAR
47 HANDLE
51 ROTARY SWITCH
54 PAWL SPRING
55 BRAKE RACK
57 BUTTON FOR BRAKE RACK
62 DUST TUBE
72 SCREW
73 SPING
74 PLASTIC BOTTOM PLATE
78 ROD B
79 ROD A(WITH SCALE)
80 GUIDE FRAME
81 SPRING WASHER
82 HOLLOW-HEAD SCREW
84 PLASTIC LINER
86 WRENCH
87 SCALE PLATE
14
POWERCRAFT NR
302100
302101
312004
312004
312002
302057
302102
302103
302104
800608
302105
806003
302106
312008
312012
312009
302058
302002
302107
302107
302107
302108
302058
302109
302110
302110
302110
302111
302112
302112
302113
302005
302005
302114
302005
302005
302115
312011
302107
Powercraft
PLUNGE ROUTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1050 W
No load speed/min | 9000-30000
Max. cutter diameter | 30 mm
Cutting depth | 30 mm
Collet | 6 & 8 mm
Weight | 3.28 kg
Lpa (sound pressure) | 89.0 dB(A)
Lwa (sound power) | 102.0 dB(A)
Vibration value | 4.3 m/s 2
PACKAGE CONTENTS
1 Router
10 Cutters (router bits)
1 Parallel guide
1 Template guide
2 Screws
2 Nuts
1 Adapter for dust extraction
1 Dust tube
1 Wrench
1 Instruction manual
1 Guarantee card
Check the machine, loose parts and accessories for transport
damage.
PRODUCT INFORMATION
Fig. A
The PBF-1050E router has been designed for professional
routing of wood, wood products and plastics.
1 On/off switch
2 Handle
3 Router base
4 Locking bolt for parallel guide
5 Opening for parallel guide
6 Collet nut
7 Spindle lock
8 Revolver-depth stop
9 Locking bolt depth stop
10 Depth stop
11 Clamping lever
12 Scale cutting depth
13 Adjusting wheel electronic speed control
14 Height adjusting button
15 Adapter for extracting dust
16 Dust outlet (Fig.F)
Powercraft

SAFETY INSTRUCTIONS

The following symbols are used in these instructions for use:
Denotes risk of personal injury, loss of life or damage to
the tool in case of non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine. Make sure
that you know how the machine functions and how to operate
it. Maintain the machine in accordance with the instructions to
make sure it functions properly. Keep this manual and the
enclosed documentation with the machine.
ATTENTION!
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions.
Keep these instructions in a safe place!
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well lit. Do
not use power tools in presence of flammable liquids or
gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g. pipes,
radiators, refrigerators).
4. Keep visitors away.
Visitors should be kept away from the work area at all
times. Do not let visitors handle the Electric Rotary
Hammer Drill at any time.
5. Store unused tools.
When not is use keep tools out of reach of children. Store
in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect
performance and may cause damage to the machine.
Forcing the job also increases the potential for accidents.
7. Use right tool.
Do not force small tools or attachments to do the job of
heavy duty tool. Do not use a tool for purposes not
intended.
8. Dress properly.
Do not wear loose clothing or Jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
9. Use safety glasses.
Also use face or dust mask when operation is dusty.
10. Connect dust extraction equipment
If devices are provided for the connection of dust
extraction and collection facilities ensure these are
connected and properly used.
11. Do not abuse cord.
Never carry tool by cord or yank it to disconnect it from
electrical socket. Keep cord from heat, oil and sharp edges.
12. Secure work.
3