Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Stand-alone mode
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
To be able to operate the sound control in standalone mode, the device must be set to Mast.
1
Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
2
Now use the buttons UP and DOWN to adjust the microphone sensitivity to the volume of the music
(Se00 = low, Se99 = high).
Automatic mode
In automatic mode, 16 show programs are available that run at an adjustable speed.
To be able to operate the automatic mode in standalone mode, the device must be set to Mast.
1
Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with ENTER again.
2
Now use the buttons UP and DOWN to adjust the running speed of the program from SP1 (slow) to SP9
(fast). Confirm with ENTER.
Individual color mix
In the color mode Manu each LED can be adjusted in intensity. The device will constantly emit the adjusted
color.
1
Press the MENU button so many times until Manu is indicated in the display. Confirm with the ENTER
button.
2
Now the display indicates Red for the color red and the corresponding intensity value. Use the buttons
UP and DOWN to adjust the desired intensity.
3
Confirm with the ENTER button. Now the color green can be adjusted, then blue and white.
4
In addition, you can adjust the strobe effect from 0 - 100% (increasing flash frequency)
Display reverse
To invert the display by 180°, press the MENU button so many times until dSIP is indicated in the display.
Confirm with the ENTER button. Select dISP to return to the default setting.
Indicate software version
To indicate the version number of the firmware (operating system of the unit), press the button MENU so
many times until Ver is indicated in the display. Confirm with the ENTER button. The version will be indicated
in the display.
Reset to default settings
The device can be reset to default settings. Press the MENU button so many times until rset is indicated in
the display. Confirm with the ENTER button.
26/32
00143099, Version 1.0
Werbung
Inhaltsverzeichnis
