Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DMX512 CONNECTION
DMX Controller
MIC
MODE
UP
DOWN ENTER
DMX IN
DMX OUT
MIC
MODE
UP
DOWN ENTER
DMX IN
DMX OUT
MIC
MODE
UP
DOWN ENTER
DMX IN
DMX OUT
A DMX512 data link is required in order to control the device via DMX. The device provides 3-pin XLR
connectors for DMX connection.
1
Connect the output of your DMX controller to the DMX input DMX IN of the device with a DMX cable.
2
Connect the DMX output DMX OUT of the device to the DMX input of the next unit in the chain. Always
connect one output to the input of the next unit until all units are connected.
3
At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between
Signal (–) and Signal (+) in the DMX output of the last unit.
4
If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended
to insert a DMX level amplifier to ensure proper data transmission.
XLR connections:
Program
Chase32 Step100
LED PIX-144 RGBW Bar
No. 51930351
EAN 4026397708561
100-240V~ 50/60Hz 50W
T1A/250V
T =45°C T =55°C
a
c
0.1m
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
POWER OUT
LED PIX-144 RGBW Bar
No. 51930351
EAN 4026397708561
100-240V~ 50/60Hz 50W
T1A/250V
T =45°C T =55°C
a
c
0.1m
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
POWER OUT
LED PIX-144 RGBW Bar
No. 51930351
EAN 4026397708561
100-240V~ 50/60Hz 50W
T1A/250V
T =45°C T =55°C
a
c
0.1m
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn Germany www.steinigke.de
POWER OUT
23/32
LED PIX-144/72
RGB/CW Bar
LED PIX-144/72
RGB/CW Bar
LED PIX-144/72
RGB/CW Bar
00143099, Version 1.0
Werbung
Inhaltsverzeichnis
