Operation; Menu Structure - EuroLite LED PIX-144/72 RGB/CW Bar Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller as well as
wireless via QuickDMX
Transmitter/Receiver.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode. Confirm with
ENTER.
Default settings shaded
Mode
DMX mode
Master/slave and DMX
function
Sound control
Automatic mode
Color mix / Strobe
Display reverse
Software version
Default
with the optionally
Display
Addr 001-512
84CH
Chnd 16CH
6CH
Mast
Slnd SLAv
d512
So0 – So16
Soun
Se00 – Se99
Aut0 – 16
Auto
SP1 – SP9
Red 000-255
Green 000-255
Manu Blue 000-255
White 000-255
Strobe 000-255
disp
dsip
Ver
rset
25/32
available EUROLITE
Setting DMX starting address
84-channel mode
d001-429
d001-497 16-channel mode
d001-507 6-channel mode
Master mode
Slave mode
DMX mode
Sound-controlled programs
Microphone sensitivity
low > high
Automatic show programs
Running speed
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Slow > fast 0-100%
Display normal
Display reversed (180°)
Indicates software version
Reset to factory settings
QuickDMX USB Wireless
Function
00143099, Version 1.0