Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote control IR-16
The IR remote control allows convenient control of the integrated show programs in automatic mode or
sound-controlled mode. Press the buttons repeatedly to switch between the programs. When actuating a
button, always hold the remote control in the direction of the sensor at the control unit's front or rear. A direct
line of sight between the remote control and the sensor is required. The IR remote control will only work in
stand-alone mode, it will not work in DMX or slave mode.
Battery
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote control
is not possible.
If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the right
and at the same time remove the battery support. For operation, one 3 V button cell
type CR 2025 is required. When inserting, pay attention that the positive pole of the
button cell shows upwards in the support.
Taste
On/off
Switch through automatic programs 1-8
Switch through sound-controlled programs 1-8
Pause / play
Speed and rotation for auto- and sound control
Define before via letter buttons.
–
Speed for automatic and sound-controlled program
Rotation speed for automatic and sound-controlled program
No function
No function
–
Change of direction rotation
No function
Funktion
29/36
00143647, Version 1.1
Werbung
Inhaltsverzeichnis
