Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Never clean the device with a brush.
•
To avoid damaging the coating, do not clean the device with metal tools.
•
Clean the oil separator after use. Press the catches of the oil separator to
remove it (see figure 2 and 3). The oil separator must be reinserted correctly
after cleaning to avoid an insufficient cooking result.
•
To clean the reflective plate on the top cover, first open the top cover and
remove the oil separator. Turn the wing screw anticlockwise to remove it.
Then unlock the upper heating element in the direction of the arrow and clean
the reflective plate with a clean and hot cloth. After cleaning, attach the upper
heating element to the holder of the protective cover and then turn the wing
screw clockwise to attach it to the upper heating element (see figure 4, 5, 6
and 7).
(2)
(5)
Oil separator
(3)
(6)
Wing screw
Heating element
(4)
Reflective panel
(7)
EN
Protection
35
Werbung
Inhaltsverzeichnis
