Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
28
BEFORE FIRST USE
1.
Before using the unit for the first time, remove all packaging materials,
stickers and labels from the unit.
2.
Remove all removable parts of the device and clean them in soapy water, then
rinse them with clean water and dry them with a clean cloth or paper towel.
3.
Attach unit parts and place the unit on a suitable surface. To ensure sufficient
heat radiation, do not place the device in a cupboard or too close to the wall.
4.
When the device is used for the first time, there may be a strange smell or
smoke caused by burning of the protective film on the heating element. This is
normal. It is recommended to run the device in Airfry+Grill mode without food
inside for 15 minutes to remove the odour. Open the door and windows to
ventilate the room when the device is used for the first time.
USE
Important instructions
1.
All plastic and packaging material should be removed before adding the food.
Food should be defrosted before preparation.
2.
Do not place the food directly on the heating plate for preparation.
3.
Do not use the device for boiling water.
4.
If you want to use the frying basket, the frying basket must be operated
together with the inner pot. There are four feet on the underside of the inner
pot to support the frying basket installed in the inner pot (see figure 1).
Inner pot
1
Frying basket
Frying basket + inner pot
Werbung
Inhaltsverzeichnis
