H O C K M O U N T In G; Shock Mounting; I-Line Shock - Orbea BLUE PAPER OIZ CARBON OIZ OMX 2023 Technisches Handbuch

36 | ORBEA
11 SH OC K M O U NT I N G
SH OC K M OUNT ING
Do not apply grease
to the thread
GREASE
20.1
5
12 N.m
GREASE
Do not apply grease
to the thread
20 OIZ CARBON 23 SHOCK MOUNTING KIT
PART NO.: XC68
20.1 Oiz carbon 23 shock-frame bolt
20.2 Oiz carbon 23 shock-linkage bolt
Always use the tightening torque
recommended by Orbea.
20.2
5
12 N.m
Q UAN T.
1
1
TECHNICAL MANUAL BLUE PAPER OIZ CARBON OMX-OMR · 2 023
I-L INE SHOCK
For the cleanest way to route the remote shock cable
through the frame, Oiz is only compatible with Fox DPS
I-Line shocks, where the remote compression adjust-
ment cable entry allows the cable to reach without bends
through the downtube.
The rebound adjustment is positioned on the opposite side
of the shock (compared to non-I-Line shocks) to allow re-
bound adjustment.
The DPS I-Line shock on Oiz 2023 models has different
adjustment and frame mounting hardware than the DPS
I-Line shocks on Oiz 2019-2022 mounts.
Compression
remote
Rebound
ORBEA | 37
EN