en
4) If needed, change the electrode orientation.
Grasp the electrode by the insulating sleeve
and pull it out of the device. Rotate the
electrode to the desired orientation and
reinsert it into the device.
Notice
The device will also accept 3/32" (2.36 mm)
non-locking electrodes.
5) Remove the tip protector from the
electrode.
6) Check the electrode connection for a secure
fit.
7) Insert the connector into the monopolar
receptacle on the generator.
4
During Surgery When Not in Use
Sterile drape
Cord lock
Holster
After Surgery
Discard the pencil, electrode, and holster after
use. These are not designed to withstand
resterilization. Do not resterilize.
1
2
3