Radioddity GA-5E Bedienungsanleitung Seite 43

TAIL - Squelch Tail
33
Elimina�on
RP-STE-Squelch
34
Tail Elimina�on
RPT-RL - Delay the
squelch tail of
35
repeater
ROGER - Roger
36
Beep
R-TONE–Repeater
37
Tone
OPNSET -Power
38
On Message
Language-
39
Language selec�on
MENU+33
MENU+34
MENU+35
MENU+36
MENU+37
MENU+38
MENU+39
40
On
Off
*This func�on is used eliminate squelch tail noise
between handhelds that are communica�ng directly
(no repeater). Recep�on of a 55 Hz or 134.4 Hz tone
burst mutes the audio long enough to prevent
hearing any squelch tail noise.
Off/ 1,2,3...10
*This func�on is used eliminate squelch tail noise
when communica�ng through a repeater.
Off/ 1,2,3...10
*Delay the Tail Tone of Repeater (X100 milliseconds)
Off
On
*Sends an end-of-transmission tone to indicate to
other sta�ons that the transmission has ended.
1000Hz/1450Hz/1750Hz/2100Hz
*To send out a repeater tone; You hold down the
[PTT] + [LAMP/MONI] key.
Logo: Performs an LCD screen test at power-on
Msg : Displays a 2-line power on message
Voltage:
*Controls the behavior of the display when the
transceiver is turned on.
Chinese
English