Basic Use; Using Short-Cuts - Radioddity GA-5E Bedienungsanleitung

done with the radios, see the sec�on called "1750Hz Tone-burst".
If you're s�ll unable to make a connec�on, contact the person in charge of the radio system with your employer or your local
amateur radio club, as the case may be.
If you for some reason want to listen to the repeater's input frequency instead, press [
reverse your transmit and receive frequencies.
This is indicated in the LCD on the radio with an R in the top row, next to the plus and minus for the offset direc�on.
7. WORKING THE MENU SYSTEM
For a complete reference on available menu items and parameters, see Appendix C, Shortcut Menu opera�ons.
Note: in channel mode, the se�ng of these features is not possible: CTCSS/ DCS tones, wide/narrow bandwidth, PTT-ID,
Busy channel lock out, channel name edit.

7.1 Basic use

Using the menu with arrow keys
b. Use the ▲/▼ keys to navigate between menu items.
a. Press the [MENU] key to enter the menu.
c. Once you find the desired menu item, press [MENU] again to select that menu item.
d. Use the ▲/▼ keys to select the desired parameter.
e. When you've selected the parameter you want to set for a given menu item;
a). To confirm your selec�on, press [MENU] and it will save your se�ng and bring you back to the main menu.
b). To cancel your changes, press [EXIT] and it will reset that menu item and bring you out of the menu en�rely.
f. To exit out of the menu at any �me, press the [EXIT] key.

7.2 Using short-cuts

As you may have no�ced if you looked at Appendix C, Shortcut Menu opera�ons, every menu item has a numerical value
associated with it. These numbers can be used for direct access of any given menu item.
The parameters also have a number associated with them, see Appendix C, Shortcut Menu opera�ons for details.
22
*
] key momentarily and you'll