Numeric Keypad - Radioddity GA-5E Bedienungsanleitung

or UHF) in the main or secondary display. When listening to broadcast FM, the [EXIT] key switches between 65-75 MHz and
76-108 MHz band.
The radios features a battery voltage meter that the current voltage of the ba�ery on the display.
To see the voltage displayed, press and hold [EXIT] key for about two seconds.

Numeric keypad

•
With these keys you can input the informa�on or
your selec�ons on the radio. In tx mode, push the
number keys to send a corresponding DTMF code.
Key
• *
A short momentary press of the key enables the reverse func�on.
If you press this bu�on for more than 2 seconds you will lock/unlock the keypad.
# key
• SCAN
If you press shortly [#SCAN] you will switch to High / Low output power.
When listening to broadcast FM a momentary press will start the scanning. Scanning in broadcast FM will stop as soon as an
ac�ve sta�on is found, regardless of scanner resume method.
To enable the scanner, press and hold the [#SCAN] key for about two seconds.
14