Manual Programming (Channels Memory) - Radioddity GA-5E Bedienungsanleitung

6.8 FM Radio (FM)
The frequency range to listen to the radio is 65-108MHz. When listening to broadcast FM,
press [EXIT] key switches between 65-75 MHz and 76-108 MHz band.
a. In frequency or channel mode, Press [FM/SOS] to turn on the radio.
b. Select the desired radio frequency with the ▲/▼ keys or input the frequency. Or
• Press [#SCAN] to automa�cally search a radio sta�on.
c. Press [FM/SOS] to exit FM radio.
Note: while you are listening to the radio, the frequency or channel of A / B receiving signal will automa�cally switch to
the frequency or channel mode for normal transmi�ng and receiving.
When the signal disappears the radio will automa�cally switch again to FM radio mode.
6.9 TX 1000Hz, 1450Hz, 1750Hz, 2100Hz repeaters tone
Press [PTT] + [LAMP/Monitor] to send 1750Hz repeaters tone. This func�on is useful for communica�ons through
repeaters.
If you have the keypad lock enabled on your radio, you can s�ll send a 1750Hz tone the regular way without having to unlock
your radio.

6.10 Manual Programming (Channels Memory)

Memory channels are an easy way to store commonly used frequencies so that they can easily be retrieved at a later date.
The radios features 999 memory channels that each can hold: Receive and transmit frequencies, transmit power, group
signaling informa�on, bandwidth, ANI/ PTT-ID se�ngs and a six character alphanumeric iden�fier or channel name .
1
Frequency Mode vs. Channel Mode
In standby mode, press and hold the [MENU] key to switch between frequency (VFO) mode and channel (MR) mode.
These two modes have different func�ons and are o�en confused.
Frequency Mode (VFO): Used for a temporary frequency assignment, such as a test frequency or quick field programming if
permitted.
19