Scheppach 3906101704 Originalbetriebsanleitung Seite 18

6. Work in full consciousness
• Do not work with the device when you are under
the influence of alcohol, drugs, medication or
other substances which might compromise the
vision, dexterity and judgment.
7. This tool is not intended for use by persons (in-
cluding children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the tool by a
person responsible for their safety (local regula-
tions can restrict the age of the operator)
8. Align the air tools away from yourself or other
people or animals. Solvents or diluents can etch
skin, lungs and eyes.
9. For your own safety always use the quick coupling
adaptor to connect the air tools to the air supply
and always regulate the working pressure by us-
ing a pressure regulator.
10. Do not exceed the max. permitted working air
pressure. Please refer to the Technical Data.
11. Do not use oxygen or flammable gases as source
of energy.
12. Check if all connections and hoses are mechani-
cally secured and if they are functioning properly.
Loose hoses may cause severe injuries. Only use
quick coupling adaptors.
13. First remove the hose from the compressed air
source and disconnect the supply hose from the
unit, to avoid uncontrolled spinning or recoil of the
supply hose.
14. Disconnect the air tool from the compressed air
source before doing any maintenance work or
when not in use.
15. Always wear personal safety equipment when us-
ing the spray gun.
16. Toxic fumes and certain materials can be poison-
ous. Those materials may create irritation or be
otherwise harmful to health.
17. Follow the recommendations shown on the signs
or written on the data sheets.
18. Always wear a respiratory protection.
19. The safety class of the system has to be in ac-
cordance with the processed materials. Always
wear safety gloves when processing varnish or
when cleaning the unit.
20. We suggest wearing ear and eye protection when
operating the spray gun.
21. Please keep in mind that the spray gun causes
strong vibrations which can lead to repetitive
strain injuries in some cases. Keep sufficient
rests.
22. When working with potentially explosive mate-
rial, keep in mind that static charges may result
from circumstances such as cleaning of non-con-
ductive parts with cloth, the flow of liquids or air
through hoses, when spray painting, etc.
18 | GB
23. Do not continue using damaged air tools. Do not
open the units and do not try to repair them your-
self. Contact a professional or our customer ser-
vice.
24. Never exceed the maximum allowable working
pressure of 8 bar. To adjust the working pressure
use a pressure reducer.
25. Do not bend the hose of the device. Otherwise it
can be damaged.
Safety instructions for working with compressed
air and blasting guns
• Compressors and lines reach high temperatures
during operation. Avoid contact! Risk of burns!
• Gases or vapours drawn in by the compressor have
to be kept free of constituents that may cause fire or
explosions inside the compressor.
• When you disconnect the hose coupling, hold the
coupling element in your hand to prevent injury
from the whiplashing hose.
• Wear goggles when working with the blow-out gun.
Injuries may easily result from foreign bodies and
blasted parts.
• Never point the blow-out gun at other persons and
never use it to clean clothes that are still being worn.
Safety information for paint spraying
• Never process paints or solvents with a flash point
below 55°C.
• Do not heat lacquers and solvents as they are highly
inflammable. Solvent and coating materials may be
flammable or combustible when they are sprayed or
atomized. Always observe the warning and safety
information of paint or solvent manufacturer.
• Do not keep or consume food and drink in the work
room. Paint vapours are harmful.
• The work room has to be bigger than 30 m
have sufficient ventilation for spraying and drying.
Never spray into the wind. It is always imperative to
observe the regulations of your local police author-
ities when spraying combustible or hazardous sub-
stances.
• Never process media such as white petroleum spir-
it, butyl alcohol and methylene chloride with the
PVC pressure hose (reduced life span).
• Keep your working area tidy. Only take as much
paint and thinner to your working area as required
for completing the job. Do not keep paint and thin-
ners in open containers; store them in a safe place
which is not easily accessible to others.
• During painting no ignition source (e.g. open
flames, lid cigarettes, lamps not protected against
explosion etc.) may be present, because during
painting explosive gases may be formed.
www.scheppach.com
and
3