APPENDIX 4. Heater parts installation
IMPORTANT! The works shall be carried out in an extremely careful way, eliminating the
possibility of damage to the paint coating.
Grate
The grate consists of 6
separate plates.
A separate seat is provided
for each plate.
Ash drawer
Place of installation and installation method for the ash
drawer are shown in the figure.
1
1
Combustion chamber reinforcement
Procedure (refer to the figure below):
1) Install the back plate with a convex part to
the wall of the firebox. The upper part of the
plate shall rest on the firebox wall, while the
lower part shall be spaced 5-10 mm from it;
2) Install side plates one by one (the order of
installation is of no importance).
1
1
2
2
2
2
71