Starting Operation - Bosch EasySpiritLevel Originalbetriebsanleitung

16 | English
Always replace all the batteries at the same time. Only use batteries from the
same manufacturer and which have the same capacity.
Take the batteries out of the measuring tool when you are not using it
u
for a prolonged period of time. The batteries can corrode and self-dis-
charge during prolonged storage in the measuring tool.
Operation

Starting Operation

Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or
u
variations in temperature. For example, do not leave it in a car for ex-
tended periods of time. In case of large variations in temperature, allow
the measuring tool to adjust to the ambient temperature before putting it
into operation. The precision of the measuring tool may be compromised
if exposed to extreme temperatures or variations in temperature.
Keep the supporting surfaces and contact edges of the measuring
u
tool clean. Protect the measuring tool against shock and impact. Dirt
particles or deformations can lead to faulty measurements.
Avoid hard knocks to the measuring tool or dropping it. After strong
u
external influences on the measuring tool, you should always carry out
calibration before further work.
Switching On and Off
To switch the measuring tool on or off, press the on/off button (5).
If no button on the measuring tool is pressed or the measuring tool is not
moved for approx. 20 min, the measuring tool will automatically switch itself
off to preserve battery life.
Switching the Audio Signal On and Off
Press the audio signal button (6) to switch the audio signal on or off.
When you switch on the measuring tool, the audio signal is switched off as
standard.
Tilt Indicator
Place the measuring tool on the vertical or horizontal surface being meas-
ured.
1 609 92A 7GE | (01.09.2022) Bosch Power Tools