actiforce ControlForce 2 Montageanleitung Seite 5

Cascading Operation
Cascading-Primary Controller
Hand-Switch
Motor 1
First Use – Cascading Instructions
• Connect Legs of Table 1 to Motor Channel of Controller 1,
• Connect Legs of Table 2 to Motor Channel of Controller 2,
• Connect Power Plug of both Controllers to power socket.
• Connect Cascading cable from
controller will start clicking).
• Connect the Hand-Switch to the
• Hold the down button of Hand-Switch until the both tables moved to the lowest position and
reversed their drive direction.
Sensor Connection (Optional)
• Plug In Sensor into the
• Sensor is active.
Cascading Cable
Motor 2
Controller 1
Table 1-Leg 2
Table 1-Leg 1
Hand-Switch
Cascading Out
(Primary)
" "
COM
" "
HS port of Controller 1 .
" " port
COM of Controller 2.
Sensor
Cascading-Secondary Controller
"
M1
"
M1
port of Controller 1 to
Motor 1 Motor 2
Controller 2
Table 2-Leg 2
Table 2-Leg 1
Cascading In
(Secondary)
Sensor
(Optional)
" " "
and M2 accordingly.
" " "
and M2 accordingly.
" "
HS port of Controller 2 (both
English
5