Connecting The Electrical Components - actiforce ControlForce 2 Montageanleitung

Connecting the Electrical Components

6 2
4
(b)
Keep in mind that the desk which you are assembling is height adjustable. The cables
of the electrical components must be able to freely follow the movement of the desk.
If the Hand-Switch is wrongly plugged into the "COM" port as below, the display of the digital
Hand-Switch will show E99 (Please refer to page 10 for ControlForce 2 (CF2) error codes or page
12 for ControlForce 2 Pro(CF2 Pro) error codes).
Do not connect Hand Switch to the "COM" port.
4
(c)
or
5 1
4
(d)
or
English
4 (a)
3