Intended Use; Improper Use - DENIOS. SpillGuard connect Kurzanleitung

1.3. Intended use

SpillGuard® connect is a mains-power-
independent leak recognition system for
detecting leaks of liquids / liquid hazardous
substances. It is designed for use in clean,
uncontaminated spill sumps. The spill sumps
should preferably be in metal or non-metallic
(plastic) materials. Outdoor use is not
permitted. SpillGuard® connect may only be
used within the limits for use defi ned on the
nameplate. It is suitable for Ex zone 0, due to
gases and vapours.
SpillGuard® connect may only be used as
a precaution with the liquids which have
already been positively tested by DENIOS.
The list of positively tested substances can be
found here:
www.denios.com/spillguard
Substances which are not include din the list
must be tested for suitability.
18/48
i
The stability list contains a
representative selection of liquid
hazardous substances. On request,
DENIOS can carry out a functional and
exposure test for your substance. The
test covers checking the reliable
detection of the substance as well as
the subsequent maintenance of the
visual and audible alarm signals for a
period of 24h (exposure test).

1.4. Improper use

The product must not be used for the
following purposes:
Use in spill sumps for storing non-
W
approved media
Use in potentially explosive areas outside
W
the nameplate limits
Use in potentially explosive areas caused
W
by dust
Any use which is not expressly described
W
as permitted in this Quick Guide
i The user is liable for any use not in
accordance with the intended use!