Intended Use Of The Equipment; Operator Duties; Permanent Obligations - DENIOS. MT 240 Betriebsanleitung

Claims for defects and liability
DENIOS is not liable for claims for defects, damage or injury to persons or property caused by one or more of the
following:
Misuse

Incorrect assembly, commissioning, operation or maintenance

Non-observance of the notices in the operating instructions

Operation with defective safety equipment or safety and protective equipment which has been fitted

incorrectly or which is not in working order
Use of the product when defects or faults are present

Incorrectly conducted repair work

Vandalism

Catastrophe situations caused by the effect of foreign bodies and force majeure

Independent conversion of the product

2.1

Intended use of the equipment

The wheelie bin tipper is used for the picking up, transport and emptying of 240 litre wheelie bins in accordance
with EN 840 up to a total weight of 150 kg.
2.2

Operator duties

All those involved in the operation, maintenance and repair of the product must have read and understood this
user manual.
No changes, extensions or modifications may be made to the product without the manufacturer's authorisation.
No liability is accepted for changes made without the manufacturer's authorisation and in such cases the
warranty will cease to be valid.
National directives and safety regulations must be complied with.
2.2.1

Permanent obligations

The following are permanent obligations for the operator:
Water, health & safety, and building law regulations are met

National regulations concerning health & safety, accident prevention, environmental protection and

handling hazardous substances are implemented
All other national rules and regulations are implemented

Misuse is prevented

Anyone who works with the product uses suitable protective equipment

Anyone who works with the product is qualified for his area of responsibility

Workers are trained regularly, at least twice a year, in order to keep safety and hazard knowledge up to

date
Clear responsibilities are assigned to employees (e.g. operation, maintenance, repair)

Maintenance and service intervals are adhered to

Damage is repaired promptly and professionally

Only accessories approved by DENIOS and original replacement parts are used

Illegible or missing symbols or identification plates are replaced immediately

03 Wheelie bin tipper 002_INT
Safety instructions
15 / 44