Eu Conformity - DENIOS. SpillGuard connect Kurzanleitung

4.4 False alarm
Under certain climatic conditions
condensation can form on the sensor surface.
This can trigger a false alarm.
Press the Push button (>1s and <10s)
1.
to turn off the alarm.
Clean the sensor surface with a soft,
2.
lint-free cloth. In this case, SpillGuard®
connect can be used again.
Switch on and calibrate SpillGuard®
3.
connect (see chapter 4.1 and 4.2).
More information
Further information on alarms,
decommissioning and disposal for example
can be found in the operating instructions.
The operating instructions can be found here:
www.denios.com/spillguard

5. EU conformity

SpillGuard® connect is certifi ed in accordance
with directive 2014/34/EU (ATEX directive).
Production is monitored by regular and
independent inspections for continuous
compliance with legal and normative
requirements.
This declaration of conformity as well as
confi rmation of conformity with directives:
2014/34/EU (ATEX)
W
2014/53/EU (RED)
W
2011/65/EU (RoHS 2)
W
can be found at the following address:
www.denios.com/spillguard
SpillGuard® connect Quick Guide | 276016 | Rev. 2
25/48