How To Remove: Shelf Supports; How To Use: Pyrolytic Cleaning - AEG BSE77280M Benutzerinformation

Clean the cavity after each use. Fat accumulation or other residue may cause
fire.
Do not store the food in the appliance for longer than 20 minutes. Dry the cavity
only with a microfibre cloth after each use.
Everyday Use
Clean all accessories after each use and let them dry. Use only a microfibre
cloth with warm water and a mild detergent. Do not clean the accessories in a
dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged
Accessories
objects.

11.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports
up and out of the front catch.
Step 3 Pull the front end of the shelf
support away from the side
wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.

11.3 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
CARE AND CLEANING
109/336