Safety Precautions; Maintenance And Care; Contact Information - Eufab 11232 Bedienungsanleitung

4. SAFETY PRECAUTIONS

• The warning triangle indicates all instructions which are
important for safety. Always follow these otherwise you
could injure yourself or damage the device.
• Children may not play with the device.
• Cleaning and user maintenance may not be carried out
by children without supervision.
• Do not treat packaging material carelessly. This may
become a dangerous plaything for a child!
• Only use this product for its designated purpose!
• Do not manipulate or disassemble the frame mount!
• For your own safety, only use accessories and spare
parts that are stated in these instructions or that are
recommended by the manufacturer!
• If the frame holder is visibly damaged, safe use is no
longer possible. The frame holder may thus no longer be
used.
• Observe the safety precautions in the instructions for
your bicycle rack!
5. OPERATING INSTRUCTIONS
1 Lockable knob nut 5 Tube
2 Spacer 6 U-bracket cu
3 Frame clip 7 Plug
4 Lock screw M8 8 Rubber inserts Ø 25 mm and Ø 30 mm
1
3
2
4 5
6
7
8
6. MOUNTING THE FRAME HOLDER
Before you can use the lockable frame holder, you must rst dismantle it.
First unscrew the knob nut. Now remove the spacer and the frame clip.
Place the thread of the lock screw onto a rm surface and carefully push
the tube in the direction of the surface. The screw head will now push the
plug out of the U-bracket cu . Pull the lock screw out completely. Wrap
the appropriate rubber insert for your bicycle rack around the U-bracket
at a suitable position for your bicycle. Open the bracket cu and place it
around the rubber insert. Push the bracket cu to close. The rubber insert
may not be folded or crushed as you do so. Replace the lock screw. First
t the frame clip and then the spacer onto the threaded end of the lock
screw. The curved side of the spacer must face the frame clip. Push the
frame clip together and push in the direction of the bracket cu to expose
su cient thread of the lock screw. Now put the knob nut onto the thread
4
and then tighten securely to ensure that all parts are tted and brought
together. Insert the plug back into the top of the bracket cu .
7. SECURING A BICYCLE USING THE FRAME HOLDER
Rotate the knob nut anti-clockwise until the frame clip has opened
su ciently to accommodate the bicycle frame. Insert the bicycle frame
into the frame clip. Rotate the knob nut clockwise until the frame clip
loosely encompasses the bicycle frame. Align the bicycle and the frame
holder to ensure that it all ts together. Now tighten the knob nut rmly.
You can only lock the frame holder when it has
been closed securely.
Insert the key into the lock of the knob nut and turn so that the red
marking faces the lock icon. Remove the key. Your bicycle is now secured
to prevent theft.
CAUTION
Before travelling, you must rst secure the bicycle in
accordance with the instructions of your bicycle rack
(tensioning straps, safety strap etc.)
The frame holder may result in minor pressure
points on the bicycle frame and damaged to the
paintwork. Protect the bicycle frame, for example,
using protective lm.

8. MAINTENANCE AND CARE

Clean the frame holder using a slightly moist, soft cloth and a mild
cleaning agent. Do not use aggressive cleaning agents, solvents or
petrol. Ensure that no cleaning agents or liquids enter the tube of the
frame holder.
Occasionally lubricate the lock with a resin-free oil.
Store the frame holder in a dry place.
9. NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of the frame holder in accordance with the laws and conditions
in your country.
The materials are recyclable. You make an important contribution to
protecting our environment by recycling, material utilisation or other
forms of reusing waste equipment!

10. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com