Safety Notes; Contact Information - Eufab 11235 Bedienungsanleitung

3. SAFETY NOTES

• Keep children away and do not allow children to
operate this device!
• Only use this product for its designated purpose!
• For your own safety, only use accessories and spare
parts that are stated in these instructions or that are
recommended by the manufacturer!
• If the frame holder is visibly damaged, safe use is no
longer possible. The frame holder may thus no longer
be used.
• Observe the speci cations and safety precautions in
the instructions for your bicycle rack!
4. OPERATING INSTRUCTIONS
Open the lock with the key in the knob nut (the red point
is located opposite the lock symbol). Remove the key.
Rotate the knob nut anti-clockwise until the holding
clamp for the bicycle frame has opened wide. Press the
holding clamp and the knob nut together, this
releases the folding section of the pipe clip. Hold the
clamp and nut together. Open the pipe clip and position
it at a suitable location, for your bicycle, on the pipe for
the U-bolt. Close the pipe clip and release the holding
clamp and knob nut. Make sure that the lock is correctly
seated. Set the frame holder to a position that is
uitable for your bicycle. Place the holding clamp around
the frame of your bicycle and rotate the knob nut
clockwise tightly so that the bicycle and frame holder
are securely attached at the U-bolt. To prevent theft,
lock the lock in the knob nut (the red point is on the lock
symbol).
5. MAINTENANCE
Cleaning: Clean the frame holder with a dry and soft
cloth only.
Maintenance: After long use in heavy rain, lubricate the
lock with a light, resin-free oil.
Storage: When not in use, store the frame holder in a
dry place.
4
6. NOTES REGARDING
PROTECTION
Dispose of the frame holder in accordance with the laws
and conditions in your country.

7. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
ENVIRONMENTAL