Starting a programme
Press the Start/Stop button (the LED of
the Start/Stop button will light up).
Starting the programme using a timer
The start of a programme can be delayed,
for example, to benefit from economy rates
of electricity at night. You can set a start
time at which the programme should start
Start at
(
) or a finish time by which the pro-
gramme should end at the latest (
The times are set based on the set time of
day, see "Time of day".
Setting the timer
Select a programme.
Programme
AutoOpen
Universal
66°C
0:19 h
Timer
Tap on
Timer
to set the timer.
Timer
Finish at
12:30
Start at
Delete
Then select the start (
Finish at
time (
).
Set the time.
Confirm your entries with the
Finish at
).
08:15
Dry+
08:15
14
32
13
31
12 30
11
29
10
28
OK
Start at
) or finish
OK
button.
Status
Start at
Universal
66°C
0:19 h
Timer
Extras
This activates the timer.
Delete
Selecting
allows you to delete the
entries and deactivate the timer.
You can add or switch off functions such as
AutoOpen
or
Dry+
for the next programme
Extras
via
(depending on the model).
Changing the timer
If you want to change the time set for the
timer, tap on
Timer
or finish time.
Deleting the timer
Press the Start/Stop button.
Cancel programme?
Delete
You will then be asked whether you want to
start the programme immediately (
whether you want to delete the timer set-
Delete
tings (
).
Alternatively, you can tap
the programme
view and delete the timer via the settings
that follow.
en - Operation
08:15
12:30
and enter the start
Start
Start
) or
Timer
again in
65