Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. Capacitance measurement (P 10)
GB
DM 620
USB
8.1 Insert the red test lead into the
8.2 Turn the function dial to the
8.3 Short-press the
8.4 Touch the probes to the capacitor pins.
8.5 Read the capacitance value on the display after it stabilizes.
Caution:
•
Take care when working with voltages above AC 30 V RMS, 42 V peak or DC 60 V. Such voltages
pose a shock hazard.
•
Before measuring, fully discharge all capacitors (especially high-voltage capacitors) to avoid
damage to the meter and user.
•
If the measured capacitor is short-circuited or the capacitance exceeds the maximum range, the
LCD will display "OL".
•
When measuring high capacitance, it is normal to take a few seconds to stabilize the reading.
•
For small capacitance measurements, it is recommended that REL mode is used to avoid the
influence of distributed capacitance and to obtain a correct reading.
12
C
P 10
position.
button to switch to capacitance measurement.
jack and the black test lead into the COM jack.
Werbung
Inhaltsverzeichnis
