Maintenance, Repair And Disposal; Technical Characteristics - Purmo Yali Digital Plus Installations- Und Bedienungsanleitung

GB
GENERAL
INFORMATION
5. MAINTENANCE,
REPAIR AND DISPOSAL
• WARNING: Disconnect electrical supply before carrying out
any maintenance activity.
• The product should be cleaned using a soft damp cloth. Do
NOT use chemical or abrasive cleaners as they will
damage the surface finish.
• The radiator is equipped with overheat protection that
cannot be reset (melt fuse). This overheat protection
disconnects the current if the radiator becomes too hot
(e.g. when covered).
• If the supply cord is damaged, it must be replaced by
the manufacturer, a service agent or similar qualified
persons in order to avoid a hazard.
• The radiator is filled with an exact amount of
environmental friendly vegetable oil. Any repairs that
require the radiator to be opened shall therefore only be
carried out by the manufacturer or an approved agent.
• In case of leakage contact the manufacturer or service agent.
• When the radiator reaches the end of its service life
follow the regulations concerning the disposal of oil.
6. WARRANTY
The product is covered by a 10 years warranty except for
the electrical and electronic components that are covered
by a 2 year warranty.
72
7. TECHNICAL
CHARACTERISTICS
ENVIRONMENTAL:
- Operating temperature
- Storage temperature
SETTING TEMPERATURE RANGE
- Comfort mode
- Reduced mode
- Frost protection mode
ELECTRICAL INSULATION
ELECTRICAL PROTECTION
IMPACT PROTECTION
POWER SUPPLY
DIRECTIVES & STANDARDS:
The product has been designed to
comply with the following
Directives and Standards.
-30°C to +50°C
-30°C to +70°C
+5.5°C to +30.0°C, must be
higher than the reduced
mode setting.
+5.0°C to +19.0°C, must
be lower than the comfort
mode setting.
+5.0°C to +10.0°C.
Class I
• IP21 when installed with
standard connection box.
• IP44 when installed with
connection box with splash
proof cover.
IK08
230 VAC – 50 Hz or 400
VAC - 50 Hz according to the
product rating label.
• EN 60730-1
• EN 60335-1
• EN 60335-2-30
• EN 62233
• EN 55014-1
• EN 55014-2
• EN 61000-3-2
• EN 61000-3-3
• EN 60529
• LV Directive 2014/35/EU
• EMC Directive 2014/30/EU
• RED Directive 2014/53/EU
• RoHS Directive 2011/65/EU
• ECO Directive 2009/125/EC