Purmo YALI DIGITAL PLUS Installations- Und Bedienungsanleitung Seite 71

• The day number will increment to the next day and the
time will be set back to "00:00".
• When all of the days have been defined, the word "SAVE"
will be displayed. To save the program, press the "OK" key to
confirm.
• If the program is not to be saved, so that any previously
user defined program is not overwritten, press the left ""
arrow key. The screen will revert back to the Program
Selection screen.
13 MAC: ZIGBEE MODULE MAC ADDRESS
Press "OK" to enter this parameter. The 16 digits of the
MAC address will be displayed, 4 digits at a time. Each of the
4 digits will be displayed for 3 seconds.
14 CodE: ZIGBEE MODULE INSTALLATION CODE
Press "OK" to enter this parameter. The 32 digits of the
MAC address will be displayed, 4 digits at a time. Each of
the 4 digits will be displayed for 3 seconds.
15 RES: NOT USED
16 End: EXIT THE PARAMETER MENU
Press the "OK" key to exit installation parameter
menu and return to normal operation.
GB
GENERAL
INFORMATION
71