Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE & ADJUSTMENT GUIDE
13
8
35
15
34
CLEANING
The stepper can be cleaned with a soft, clean, and damp cloth. Do not use abrasives or solvents
on plastic parts. Please wipe your perspiration off the stepper after each use. Be careful not get
excessive moisture on the computer display panel as this might cause electrical hazards or
electronics failure.
Please keep the stepper, especially the computer, out of direct sunlight to prevent screen damage.
Please inspect all assembly bolts and pedals on the stepper for proper tightness every week.
STORAGE
Store the stepper in a clean and dry environment, away from children.
NOTES:
Do not use the stepper for more than 15 minutes as the hydraulic cylinders may overheat and
become damaged.
ADJUSTING THE STEPPING HEIGHT
Turn the Adjustment Knob (No. 21) clockwise to increase the
stepping height.
1
Turn the Adjustment Knob (No. 21) counter-clockwise to
21
decrease the stepping height.
ADJUSTING THE HEIGHT OF HANDLEBAR
Turn the Adjustment Knob (No. 15) counter-clockwise and
pull out it from Bottom Handlebar Post (No. 34). Adjust the
Upper Handlebar Post (No. 35) to desired position, then
insert and re-tighten the Adjustment Knob (No. 15) by turning
it clockwise.
11
Werbung
Inhaltsverzeichnis
