4.8.8 Upgrade
Note: This function is available only for "Supervisor".
This function is used when users need to upgrade the network camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided
by your installer or distributor.
Note: For system upgrade from a web browser, it only supports upgrading one file at a
time. To upgrade all files, you need to start from Step1 again when one file is
upgraded.
If you want to upgrade all files at a time, please use our supplied CMS software,
Video Viewer. For details, please refer to "3.4.3 Firmware upgrade" at 8.
Step1: Click "
" to browse to where you save the upgrade files, and select one of them.
Step2: Click "Upgrade" to start system upgrading.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power
during firmware upgrade, or the upgrade may be failed. The camera will reboot
after the upgrade.
29