Digital Ptz (Dptz) Operations - Surveillance Systems AVN314 (ONVIF) Benutzerhandbuch

4.4 Digital PTZ (DPTZ) operations

This fixed network camera type has PTZ capability, i.e. digital PTZ (hereafter called "DPTZ"), for wide area
monitoring.
Note: When this function is enabled, Face Tracking, Smart Zoom, and optical zoom are not allowed to
use.
STEP1: Click "DPTZ" to show the DPTZ control panel.
STEP2: Select the functions when needed:
ICON FUNCTION
Fit to screen /
/
Restore to original size
Take snapshots
Enable Auto mode
Enable DPTZ
Zoom in / out
/
Max. zoom in / out
/
DESCRIPTION
There are several monitor resolutions available. When the selected resolution is out of your
current live view support, a part of your surveillance area might get covered on the screen, and
you need to manually move on the screen to check the covered part.
: This is used to scale the selected resolution to fit in the current live view size.
: This is used to restore the scaled live view resolution to its original size.
Click to take a snapshot of the current view, and save to the location specified in "Config."
"Camera" "Camera" "Snapshot Path".
Click to activate the auto mode of the camera. The auto mode could be "Sequence" or "Auto
Pan" specified in "Config." "Camera"
Note: This function is available only when DPTZ is enabled.
Sequence: Move to several preset points accordingly and regularly specified in "Config."
"Camera" "Cruise"
Note: Preset points are set in "Config."
Auto Pan: Pan automatically and horizontally.
Click to activate the digital PTZ function. When this function is enabled, the following
operations are available:
Auto mode
Move up / down / left / right after digital zoom-in.
Click to zoom in / out the image.
Click to zoom in / out the image.
16
"Cruise" "Active Mode".
"Active Mode" "Sequence".
"Camera" "Preset".